Indoor Illuminated Stand-Alone keypad with 1200 users and three outputs. Includes duress, quick code, wrong-code lockout, egress input, three LEDs, built-in buzzer, and back box.
Features: - Built-in proximity reader. 125hHz(EM125)
- 4 Available programmable access modes for all 3 outputs: card only, code only, card and common user code, card and unique user code
- 1,200 Users over 3 Outputs. Codes may be 4~8 digits:
- Output #1 – Form C relay, 1A@30VDC, 1,000 users
- Output #2 – Form C relay, 1A@30VDC, 100 users
- Output #3 – Transistor ground, 100mA@24VDC, 100 users
- Super user code gives admin access to keypad
- Durable and attractive stainless steel faceplate
- Programmable lock out or duress output after 5~10 unsuccessful attempts to key in a code
- Relay output inhibit control
- Programmable egress input with optional warning alarm and delayed egress
- Built-in tamper (N.C.) circuit
- EEPROM memory prevents data loss
- Power: 12~24 VAC/VDC
- Illuminated keypad with programmable status LEDs
- Door-propped-open warning
- Alarm output triggers an optional alarm control panel if a protected door is forced open
- Programmable door open alarm
- Mantrap: for a protected area with two doors, this feature allows only one door to be open at a time
- Duress output signals a silent alarm if an authorized user is forced to open the door under duress
- Keypad Active Output activates for 10 seconds when any key on the keypad is pressed
- Visitor codes can be programmed for one time use or for a specific amount of time
- Real-time clock to auto-disable access at specific times