Potter's PFC-5008 Fire Alarm Control Panel is a microprocessor based unit designed for small to medium commercial, residential, multi-family, institutional and industrial occupancies. Fully configurable using DIP switches, it enables the user to configure the system to meet their specific requirements. The PFC-5008 is a PFC-5004E with the ZA42 expansion card factory installed. In addition, the preassembled kit contains a UDACT-9100 for digital communications.
The PFC-5008 comes standard with 8 Class B (Style B) Initiating Circuits which may be configured as 4 Class A (Style D) circuits. In addition, it comes equipped with 4 Class A/B (Style Z/Y) Indicating circuits which are each rated at 1.7 amps. The panel also includes a 5 Amp Power Supply which powers the system and supplies a 4-wire resettable regulated smoke power supply of 24 VDC 100mA maximum.
Features: - 8 Class B (Style B) Initiating Circuits which may be configured as 4 Class A (Style D) circuits.
- 4 Class A/B (Style Z/Y) Indicating Circuits with individual trouble indicators (1.7 Amps max. per circuit.)
- Each Indicating Circuit can be configured as Silenceable or Non-Silenceable
- Audibles may be configured as Steady, Temporal Code, California Code or March Time
- Predefined Initiating Circuits can be configured as Waterflow or Latching/Non- Latching Supervisory
- Auxiliary relay contacts for Common Alarm, Common Trouble and Common Supervisory.
- If no Supervisory circuits are enabled, the Supervisory relay becomes a second Alarm relay.
- Zone Disconnect Switches
- Built-in RS-485 Interface for RA8F Multiplexed Remote Annunciators (Up to 3 Annunciators)
- Interface for Remote Trouble Indicator
- Built-in Walk Test operation
- Auto Signal Silence
- Selectable Alarm Verification on Initiating Circuits
- 5 Amp Power Supply
- Output for 4-wire resettable regulated smoke power supply of 24 VDC 100mA maximum.
- Output for PRTI or Remote Annunciators of 24VDC, 300mA max, unfiltered
- Extensive Transient Protection
- Easy configuration via DIP switches