Paging Interface FXO FXS VOX

Product #: FXI-1

Description

Viking’s FXI-1 universal paging interface allows you to provide paging from virtually any type of phone system instead of from a microphone. You can also provide background music and electronic night bell over the audio system. The FXI-1 provides 30V talk battery for interfacing with an FXO or unused analog line input/trunk port. With the flip of a switch, the unit can connect to a FXS or PABX station ring trip port. No power supply is required in this mode. In the event that it must be connected to a “dry” 600 ohm paging port, the built-in voice activation (VOX) is in control. This configuration is useful when interfacing with systems that do not provide a paging contact closure, such as Panasonic, South Western Bell, Intertel, etc. In all modes the FXI-1 provides normally open or normally closed relay contacts to activate the central paging amplifier equipment or connect to an external background music source. After paging, the FXI-1 auto disconnects on CPC, busy signal, silence or default disconnect timer. An electronic night bell over paging feature can be activated from a momentary phone system contact closure (FXO and page port mode only).
    Features:
  • Select: FXO (loop start), FXS (ring trip) or paging port (VOX relay) interface mode
  • No power supply required in FXS interface mode
  • Up to 6 units can be powered from one adapter in the FXO or VOX mode
  • 30V DC talk battery for interfacing with FXO or unused phone system line input/trunk port
  • Floating 600 ohm paging output with volume control
  • Normally open or closed relay for external paging amp activation or interfacing the paging amp with an external background music source
  • 800 Hz pre-announce page tone (on/off)
  • Compatible with 24 to 48 volt FXS operation
  • Calling party control (CPC) detection for immediate disconnect
  • Busy signal detect disconnect
  • 2.5 to 5 second VOX silence disconnect timer
  • Programmable VOX trigger sensitivity
  • 16 or 36 second default disconnect timer
  • Screw terminal block connections
  • Wall mount housing: (2) #6x3/4 panhead screws included

Additional Information: